Jual Emulsifier Soluble Cutting Oil | Cutting Fluid |Cutting Coolant
Emulsifier Cutting oil atau emulsi cutting oil adalah bahan dasar pembuatan cutting oil. Dengan bahan dasar Emulsifier ini setelah dicampurkan dengan base oil seperti parafin 65, atau base oil lainnya, maka akan didapat campuran water soluble cutting oil siap pakai.
Jual Emulsifier Soluble Cutting Oil | Cutting Fluid |Cutting Coolant
SCE100 Emulsifier Cutting Oil ini merupakan water soluble cutting oil, yang artinya saat aplikasi pada proses metalworking akan bercampur dengan air dengan komposisi tertentu. Biasanya dikenal juga sebagai Cutting Fluid, Cutting Coolant, Soluble Oil atau Metalworking Fluid
Jual Emulsifier Soluble Cutting Oil | Cutting Fluid |Cutting Coolant
SCE100 Emulsifier Cutting Oil ini dapat digunakan untuk proses Metalworking seperti Cutting, Grinding, Laping dan sebagainya.
Keunggulan SCE100 Emulsifier Cutting Oil
- Ongkos pembuatan lebih Murah
- Mutu Terjaga
Jual Emulsifier Soluble Cutting Oil | Cutting Fluid |Cutting Coolant
Benefits of metalworking fluids (coolants)
Lubrication and cooling effects provided by cutting fluids (coolants) result in the following benefits of metalworking:
- Better surface finish.
Cutting (metalworking) fluids lubricate the workpiece-tool metal-to-metal contact zone preventing tool galling and seizure, which assures good surface finish. Additives in lubricating oils#Extreme pressure additives|EP (extreme pressure) and other additives (sulfur, chlorine, phosphorous) enhance the lubricating effect of the fluids.
- Longer tool life.
Temperature of a tool properly cooled by a cutting fluid (coolant) does not exceed the critical value, beyond which the tool hardness drops and its wear rate increases.
- Narrower tolerances of the work piece size.
Cutting fluids provide both: decreasing the amount of heat generated in the workpiece-tool contact zone due to reduction of the friction (lubricating effect) and removing the heat (cooling effect). Thus cutting fluid stabilizes the work piece temperature providing better control of its geometry. Cutting fluids reduce the tool wear and prevent formation of built-up edges, which also results in more precise processing.
- Lower energy consumption.
Reduced friction provided by a metalworking fluid results in decreased work of the operation (cutting, abrading or forming).
- Cleaner cutting zone.
Cutting fluids remove the chips and fines formed in cutting (abrading) operations keeping the cutting zone clean and preventing the surface damage.
- Better corrosion protection.
Metalworking (cutting) fluids may contain Corrosion inhibitors. Such fluids form a protection film on the work piece surface, machine parts and chips.
Bejubel Market Place Terbaik IndonesiaIncoming search terms:
- cutting oil (47)
- jual cutting oil (18)
- cutting fluid (12)
- harga cutting oil (11)
- jual Emulsifier (11)
- cutting oil water soluble (5)
- emulsifier (3)
- oli untuk cutting (2)
- oil cutting (2)
- penjual additive ep (2)
